6702-45 MAWHOOD SHEFFIELD mortise chisel. 3/4 inch marked on one side with name and 1943 on other side. Nickel plating 80%, handle has some red stain near top, chewing at end. Small crack at base where it meets handle. Good 30 - 60 (KGM248) 6702-46 Lot of mixed socket chisels. 9 total. 2 inch by OHIO TOOL, 1 inch and 5/8 inch by WITHERBY, 1-3/4 inch, 3/4 inch, and 1/2 inch by G.I. MIX & CO., 3/8 inch, 1/4 inch, and 1/8 inch unmarked. Most are bevel edge, a couple need honing, a few handles don't fit snug. Good 50 - 100 (DOR236) 6702-47 Lot of four edge tools. 1 inch and 2-1/4 inch diameter BUTCHER tang gouges, 1 inch needs a new handle, larger one by has a few chips on blade but can be honed out. 1 inch solid metal corner chisel with a few spots of surface rust but edges sharp. And 1/2 inch chisel with metal handle, edge sharp. Good 40 - 80 (ALV127, 193, 516, 546) 6702-48 Lot of three STANLEY everlasting chisels. 3/8 inch, 1/2 inch, and 5/8 inch. All marked with 5/6/24 patent date but only two smaller ones have sweetheart mark. All have same user initials, discoloration spots on metal, light wear to wood and stamps. Good 40 - 80 (BSR138) *6702-49 Lot of four tools. A 1/4 inch chisel marked "L. BUTSHER" which could be typo of Butcher, handle has significant inactive worm on one side. A 3/4 inch BUTCHER gouge, handle has chipping at end, some light rust but edge sharp. And two turnscrews, 7 inch and 9-1/2 inch long, some wear. Good- 20 - 40 (DSD26) 6702-50 Lot of four STANLEY chisels. 1/4 inch and 3/4 inch everlasting with sweetheart marks and wood handles, a 1 inch No. 720, and a 1/4 inch No. 40 everlasting with black handle. All edges sharp, light wear and a couple have some discoloration. Good 50 - 100 (DOR251) 6702-51 Lot of miscellaneous chisels. 18 total, 2 inch to 1/4 inch in width, one is 1 inch skew, a few are bevel edge. Makers include STANLEY, BUCK BROS, BUTCHER, PEXTO, FULTON, WORTH, about half unmarked. Handles vary from chewed ends to replaced new, most ok. Some rust stains and light pitting on a few. Good- & better 60 - 120 (OVR380) *6702-52 Lot of five handled tools. Four turnscrews, 10 inch to 5 inch in length, makers include W.J. (William Johnson?), J. MELLER, and BOOTH MILLS & CO, one unmarked. Plus a scratch awl. All handles are smooth and look polished, one turnscrew has rust. Good 25 - 50 (RSR34) 6702-53 Lot of four crank neck gouges. Two marked BUCK BROTHERS, other two unmarked but might also be Buck as all four handles are marked "The Wellman Prod. Co. Cleveland, O." 1-1/2 inch, 1 inch, 1/2 inch, and 1/4 inch in width, handles have some wear and end of one painted red, some very light surface rust on a couple. Good 35 - 70 (PNG50) *6702-54 Lot of three tools. A 11-1/2" turnscrew by KNAPP & COWLES, moderately worn, a 1/2 inch chisel by BLOOMER & PHILLIPS with handle marked Lutz File Co., some grey paint on handle, and a 12 inch long double ended pick marked MOUND TOOL CO. Good 20 - 40 (AND5, 9) Bid now at www.finetooljournal.net