6603-327 Large burl mallet. 6" round head with 4" handle, some checks in edges and one along full edge. One chip from edge, both sides have indentations in middle from use Good- (DGO6) 30-60 6603-328 Lot of two mallets. A 6" x 3-1/2" rectangular head made of lignum vitae, 9" handle. A few larger chips from edges but still attractive. And a smaller 4-1/2" x 2" made of maybe oak, one end has wear from use, 13" handle has wire wrapped near top. Both have hangholes. Good (DJS239) 40-80 6603-329 Large hoop splitter.. Conical shape with three blades set at 120 degrees. Painted black on handle and gold on body. Heavy and weighs at least five pounds. Good (ALV528) 30-60 6603-330 Lot of six tack hammers. Only three marked, one STANLEY, one SHAPLEIGH HARDWARE, one WATERSONS DETROIT. Stanley one still has 75% of original decal, a couple handles have staining, one has hanghole, overall ok. Good (NW317, 323, 324, 326, 327, 350) 30-60 6603-331 Lot of two hammers. C. HAMMOND No. 0 cobbler hammer with clean head and looks like handle replaced. Plus an unmarked claw hammer with worn and paint splotched handle. Good- & better (NHN329) 30-60 6603-332 Double claw hammer. Not marked and not sure who maded but there are a handful of examples out there. Unicast body with top claw and smaller bottom claw that sits almost flush to handle. Has light use with some small dings to poll and top claws. Spots of rust and some scratching to surface. Handle looks original with some cracks at top and bottom. Different. Good (PDM1) 100-200 6603-333 HEBBLETHWAITE patented nail puller. Patent No. 529384. Stepped claw for extra leverage when pulling nails. Also sometimes referred to as a hammer/wrench combination. Has replaced handle, head has a few small spots of rust, marked FULTON UTILITY and was advertised in the 1915 Sears & Roebuck catalog as the Fulton Utility Hammer. Good (PDM3) 75-150 6603-334 Lot of two hammers. A WARNER & NOBLES tack hammer with square poll and 80% nickel plating and some rust on head, handle has some light stains but overall good. And an unmarked paving or chipping hammer with flattened back chisel edge, chips on sides of poll, some rust, hanghole. Good- & better (WCS34) 40-80 Bid now at: https://finetooljournal.net/auction/current-auction