~6701-259 KEEN KUTTER broad axe. Head pitted and a a little rusty but can see the Keen Kutter imprint, 10-1/2 inch edge, 25 inch handle has inactive worm and a few chips. Good- (CLA239) 40 - 80 ~*6701-260 Broad axe. 9 inch edge has some chips, unmarked, some pitting and rust. Handle has crack near head that would need repaired or new handle to use. Fair (EDM2) 20 - 40 ~6701-261 Lot of two broad axes. A BEATTY & SON with oxe stamp, 5 inch recently sharpened edge, 16 inch handle with crack on one side, some surface rust. And a fairly clean one with 6 inch edge, some spots of light surface rust, 13 inch handle. Good (EDM3) 30 - 60 ~6701-262 GIFFORD WOOD CO. ice axe. Marked 605 on 14 inch wide head, a few chips from end and some surface rust, 14 inch handle has light wear. Good (CLA246) 30 - 60 ~6701-263 Lot of two axes. A brick axe with 4 inch double heads and marked only Cast Steel, 9 inch handle, clean. And a strapped fire axe, looks English, with poll and 2-1/2 edge, clean with 14 inch handle. Good+ (EMN42, 44) 50 - 100 ~6701-264 GREAVES & SONS cooper's axe. Marked with Greaves and Electro Boracic Steel, 10 inch edge has some small nicks that could be honed out, some spots of rust. 10 inch handle has large chunk missing lengthwise. Good (CLA425) 60 - 120 ~*6701-265 Lot of two edge tools. A broad hatchet, unmarked, 5 inch edge, clean and sharp, 12 inch handle has some wear at end. And an axe head, also unmarked, 7-1/4 inch wide with 4 inch edge, some pitting. Looks recently cleaned and sharpened and all it needs is a handle. Good (HMS21, 22) 25 - 50 ~6701-266 Broad axe. Heavily pitted head, 11 inch edge, appears unmarked. With newly replaced 11 inch handle. Good (SPM?) 30 - 60