2. STANLEY BEDROCK No. 605C smoothing plane. Later type with flat top sides. Vee shaped logo on cutter. Wood ok, japanning 75%, a few spots of discoloration on body. Good 60-120 3. STANLEY No. 10 carriage makers rabbet plane. Later type with kidney shape in lever cap, japanning 99%, wood good, clean. Good+ 40-80 4. STANLEY No. A6 fore plane. Rarest of the aluminum bench planes; early type with patent date cast into bed and sweetheart cutter. Average scratching on sole, lever cap has chips on bottom and no plating, wood lightly worn and old chip on edge of tote smoothed over. Would clean up nicely. Good 50-100 5. OHIO TOOL No. 328 patented jointer plane. OTC "Thistle Brand" cutter, some light surface rust, japanning 70%, wood ok. Good 60-120 6. STANLEY BEDROCK No. 605-1/2C smoothing plane. Looks like a Type 7 but has round top cheeks, surface rust, user initials stamped in cheeks, japanning 90%, large chunk missing on side of tote, plating good on lever cap and could be newer replacement. Good- 80-160 7. STANLEY No. 5-1/4 junior jack plane. Later type with kidney shape in lever cap, japanning 95%, wood lightly worn, a few light scratches on sole. Good 25-50 8. STANLEY BEDROCK No. 604-1/2C smoothing plane. Type 6 with flat top sides and vee mark on cutter, wood has light wear and chip and hairline crack at base of tote at screw. Japanning 95%, light surface rust. Good 120-240 9. STANLEY No. 2 bench plane. Later type with kidney shape in lever cap, japanning 95%, lever cap good, some wear to wood but no major damage, light surface rust that can be easily cleaned. Good 75-150 010. STANLEY No. 62 low angle jack plane. Designed for cutting cross and end grains, this is one of Stanley’s rarer planes. Minor flaking to nickel, japanning 85%, sweetheart mark on cutter, mouth ok. Repaired crack in tote and old chip on side of tip, dinging to knob, a few spots of mild surface rust. Good 175-250 Antique Trade Tool Auction 2017 Bid Now at: FineToolJournal.Net